+86-755-29708636

sales@ptms-mold.com
italianoit
  • #
  • #
  • #
  • #
  • #
Menu
News center
  • Two Color Plastic Custom Injection Molding
    Two Color Plastic Custom Injection Molding

    PTMS as a china plastic injection mold supplier, we are also china injection mold exporter for many years, so we have many years experience in plastic injection mold making and custom injection molding production. We knew the structure of plastic parts is very complex, so there will be many injection shot on the custom plastic injection mould, it also called multi shot injection molding.   The Multi shot injection molding refers to creation of multiple layers relative to the starting axis of the initial mold. In other words, the warm, heated materials are inserted into the mold in a very specific sequence one after another. This creates a layering effect between materials while maintaining relatively high-energy interactions at material boundaries. This is important because it implies that the inter-layer bonds are stronger in many cases than when the layers are applied to a previously cooled part, as is more closely the case of over molding. While there are other applications, this operation is preferred when varying molds (different geometries) are desired between material layers.   If you need to know more data of multi shot injection molding, please visit our website ptms-mold.com and contact us by sales@ptms-mold.com, we will learn and share more with you.

  • China Two Color Custom Plastic Injection Molding
    China Two Color Custom Plastic Injection Molding

    PTMS as one of china custom plastic injection parts suppliers, also one of double injection molding manufacturers in china, we always provide high quality custom injection molding and double color injection molding to the worldwide customers. In the fact, the double color injection molding also called two component injection molding. We will share some data about double injection molding, two component injection molding describes insertion of multiple viscous materials injected simultaneously, as opposed to placing one material as an additional layer relative to another. In other words, it creates a sandwich-like structure where both materials mold around each other as dissimilar liquids, and exist in such a state at the same time. Relative to the part center, materials can be injected concentrically using the same mold/gate, or regionally using gates at different locations. If you want to find high quality plastic injection mold manufacturers, you can contact PTMS, for more please visit our website ptms-mold.com, we are a china custom injection mold supplier, also we are one of china double injection molding manufacturers, always make top quality custom plastic injection mold and injection molding to clients.

  • Cooling of Cavity and Core for Custom Injection Mold
    Cooling of Cavity and Core for Custom Injection Mold

    PTMS as a china plastic injection mold supplier, we are also china injection mold exporter for many years, so we have many years experience in plastic injection mold making, how to make high quality injection mold? The design is very important, as we know, the injection mold will be very hot when production in injection machines, so the cooling should be good, we will share the knowledge of injection mold cooling.   The injection mould is made of cavity and core, so it include two cooling, cavity cooling and core cooling. Cavity plate cooling by drilled holes. The cavity plate is drilled around the cavity insert and plugged with copper or aluminum taper plugs at the ends of openings. Using pipe connected at the inlet and outlet ports, water is circulated to cool the mold. Direct cooling of core insert (baffle system)—The core is drilled by keeping sufficient wall thickness. A baffle plate is located between the drilled hole, dividing the hole into two halves, allowing the water to contact the maximum area in core so cooling may take place. Annular cooling of cavity insert—A circular groove is made on the core for water circulation. To prevent leakage, O-rings are used above and below the cooling channel.   We can make top quality custom plastic injection mold with perfect cooling design, so the injection mould has a long mold life when custom moulding production, if you want to know more please visit our website ptms-mold.com, we would like to share and learn more from the worldwide plastic injection moulders.

  • The Attributes of Plastic Injection Mold Cooling Design
    The Attributes of Plastic Injection Mold Cooling Design

    PTMS as a china plastic injection mold supplier, we have much experience in plastic injection mold making, also a multi-cavity injection mold factory, so we can make high quality custom plastic injection mold for customers. How to make injection mold? Firstly we have to design a perfect injection mold, the cooling design is very important in mold design and mold making, so we will share some desirable attributes of the mold cooling design that include: Constant mold temperature for uniform quality, Reduced cycle time for productivity, Improved surface finish without defects, Avoiding warpage by uniform mold surface temperature (warpage caused by nonuniform cooling), Long mold life. If you need top quality custom plastic injection mold and custom moulding, you can contact us, for more details please visit our website ptms-mold.com, hope we can design and make more high quality injection molds and injection molding for the worldwide people.

Products
Metallic Case Research Development
  • Brand:

    PTMS
  • Payment:

    T/T
  • Product Origin:

    China
  • Color:

    Colorful
  • Shipping Port:

    Shenzhen, China
  • Lead Time:

    30-60 days
contact now
Product Details

Metallic Injection Molding Case Research Development


PTMS as an professional plastic injection mold company in china, we have much experience in plastic injection mold making and injection molding, always provide high quality custom plastic injection molding to the worldwide customers, so if you need high quality injection moulding please feel free to contact us, send RFQ to sales@ptms-mold.com, thank you very much for your time!


Research


research development Our R&D team has 6 members who have much experience in part optimization, rib&boss design, dimensional properties, mechanical properties, cost analysis and etc. The manufacturing engineers also have much knowledge and expertise in numerous product industries, they can design perfect part fit to the products, ODM or OEM in products, capability include all aspects of injection molding from material selection to process optimization techniques.


We can give customers perfect part design, good materials comments, mechanical properties, cost analysis and etc, especially mechanical properties for the products, for example, the value of the products, how to design perfect parts and control the cost in a reasonable price and etc.


Development


Our team can develop high quality electronic product according to OEM/ODM. We have good suppliers chain who focus on PCB, metal stamping, package and etc, also 2nd operation plants work with us, they specialized in plating, painting, printing and etc. So we can develop high quality electronic product with reasonable cost.


Thanks for checking our product site, if you have some new idea please send us data to sales@ptms-mold.com, we will study and work with you for new products.


Reference

1. More plastic injection mold products, please refer http://www.ptms-mold.com/plastic-injection-mold_c4

2. More plastic injection molding parts products, please refer http://www.ptms-mold.com/plastic-injection-molding-parts_c5

3. More double injection molding products, please refer http://www.ptms-mold.com/double-injection-molding_c6

4. More silicone rubber compression molding parts products, please refer http://www.ptms-mold.com/silicone-rubber-compression-molding_c7 

5. More casting products, please refer http://www.ptms-mold.com/casting_c8

6. More injection mold, injection molding, casting products, please refer http://www.ptms-mold.com/products

7. Learn more about PTMS, please refer http://www.ptms-mold.com/

inquiry now

Subject :Metallic Case Research Development

Copyright © 2002-2018 PTMS COMPANY LIMITED