+86-755-29708636

sales@ptms-mold.com
italianoit
  • #
  • #
  • #
  • #
  • #
Menu
News center
  • Two Color Plastic Custom Injection Molding
    Two Color Plastic Custom Injection Molding

    PTMS as a china plastic injection mold supplier, we are also china injection mold exporter for many years, so we have many years experience in plastic injection mold making and custom injection molding production. We knew the structure of plastic parts is very complex, so there will be many injection shot on the custom plastic injection mould, it also called multi shot injection molding.   The Multi shot injection molding refers to creation of multiple layers relative to the starting axis of the initial mold. In other words, the warm, heated materials are inserted into the mold in a very specific sequence one after another. This creates a layering effect between materials while maintaining relatively high-energy interactions at material boundaries. This is important because it implies that the inter-layer bonds are stronger in many cases than when the layers are applied to a previously cooled part, as is more closely the case of over molding. While there are other applications, this operation is preferred when varying molds (different geometries) are desired between material layers.   If you need to know more data of multi shot injection molding, please visit our website ptms-mold.com and contact us by sales@ptms-mold.com, we will learn and share more with you.

  • China Two Color Custom Plastic Injection Molding
    China Two Color Custom Plastic Injection Molding

    PTMS as one of china custom plastic injection parts suppliers, also one of double injection molding manufacturers in china, we always provide high quality custom injection molding and double color injection molding to the worldwide customers. In the fact, the double color injection molding also called two component injection molding. We will share some data about double injection molding, two component injection molding describes insertion of multiple viscous materials injected simultaneously, as opposed to placing one material as an additional layer relative to another. In other words, it creates a sandwich-like structure where both materials mold around each other as dissimilar liquids, and exist in such a state at the same time. Relative to the part center, materials can be injected concentrically using the same mold/gate, or regionally using gates at different locations. If you want to find high quality plastic injection mold manufacturers, you can contact PTMS, for more please visit our website ptms-mold.com, we are a china custom injection mold supplier, also we are one of china double injection molding manufacturers, always make top quality custom plastic injection mold and injection molding to clients.

  • Cooling of Cavity and Core for Custom Injection Mold
    Cooling of Cavity and Core for Custom Injection Mold

    PTMS as a china plastic injection mold supplier, we are also china injection mold exporter for many years, so we have many years experience in plastic injection mold making, how to make high quality injection mold? The design is very important, as we know, the injection mold will be very hot when production in injection machines, so the cooling should be good, we will share the knowledge of injection mold cooling.   The injection mould is made of cavity and core, so it include two cooling, cavity cooling and core cooling. Cavity plate cooling by drilled holes. The cavity plate is drilled around the cavity insert and plugged with copper or aluminum taper plugs at the ends of openings. Using pipe connected at the inlet and outlet ports, water is circulated to cool the mold. Direct cooling of core insert (baffle system)—The core is drilled by keeping sufficient wall thickness. A baffle plate is located between the drilled hole, dividing the hole into two halves, allowing the water to contact the maximum area in core so cooling may take place. Annular cooling of cavity insert—A circular groove is made on the core for water circulation. To prevent leakage, O-rings are used above and below the cooling channel.   We can make top quality custom plastic injection mold with perfect cooling design, so the injection mould has a long mold life when custom moulding production, if you want to know more please visit our website ptms-mold.com, we would like to share and learn more from the worldwide plastic injection moulders.

  • The Attributes of Plastic Injection Mold Cooling Design
    The Attributes of Plastic Injection Mold Cooling Design

    PTMS as a china plastic injection mold supplier, we have much experience in plastic injection mold making, also a multi-cavity injection mold factory, so we can make high quality custom plastic injection mold for customers. How to make injection mold? Firstly we have to design a perfect injection mold, the cooling design is very important in mold design and mold making, so we will share some desirable attributes of the mold cooling design that include: Constant mold temperature for uniform quality, Reduced cycle time for productivity, Improved surface finish without defects, Avoiding warpage by uniform mold surface temperature (warpage caused by nonuniform cooling), Long mold life. If you need top quality custom plastic injection mold and custom moulding, you can contact us, for more details please visit our website ptms-mold.com, hope we can design and make more high quality injection molds and injection molding for the worldwide people.

Products
Red Silicone Rubber Compression Molding Shovel
  • Brand:

    PTMS
  • Payment:

    T/T
  • Product Origin:

    China
  • Color:

    Red
  • Shipping Port:

    Shenzhen, China
  • Lead Time:

    30-45 days
contact now
Product Details

Red Silicone Rubber Compression Molding Shovel


silicone rubber compression molding shopWe can make various silicone rubber compression molding parts such as silicone keypad, silicone molding automotive key case, silicone rubber bottle sleeves, silicone bottle cap, silicone sealing gasket, silicone phone holder, rubber cover and etc. We can also make the second operation for silicone rubber molding parts, such as silk-screen printing, painting, laser etching, UV finishing and PU finishing. The silicone molding parts will be packed by pp bag in carton and than delivery by sea or air, anyway, we will pack the silicone parts as customers’ need.


The advantages of Silicone compression tooling:


1. The short lead time for the compression mold manufacturing, normally it is less than 15 days, but sometimes we can make out the molds within 5-8 days.

2. The single cavity silicone mold cost is about 2% cost of the injection mold for rubber molding and 10% cost of the mass production compression mold cost.

3. It is easier to make the rubber product undercut with compression molding.

4. It is easier to have the over molding and insert molding.

5. It has the various color rubber parts manufacturing without additional charge.


If you need high quality precision silicone molded parts, but you can't find a good custom silicone mold manufacturer, PTMS is a china injection silicone rubber manufacturer, we have much experience in silicone rubber compression molding, so you can contact us, send RFQ to sales@ptms-mold.com, we will give you valuable solution for your projects.

Thank you very much for browsing our product page, please send us RFQ to sales@ptms-mold.com if you need our service, we will try our best to make value for you!


Reference

1. More plastic injection mold products, please refer http://www.ptms-mold.com/plastic-injection-mold_c4

2. More plastic injection molding parts products, please refer http://www.ptms-mold.com/plastic-injection-molding-parts_c5

3. More double injection molding products, please refer http://www.ptms-mold.com/double-injection-molding_c6

4. More silicone rubber compression molding parts products, please refer http://www.ptms-mold.com/silicone-rubber-compression-molding_c7 

5. More casting products, please refer http://www.ptms-mold.com/casting_c8

6. More injection mold, injection molding, casting products, please refer http://www.ptms-mold.com/products

7. Learn more about PTMS, please refer http://www.ptms-mold.com/

inquiry now

Subject :Red Silicone Rubber Compression Molding Shovel

Copyright © 2002-2018 PTMS COMPANY LIMITED